http://www.cgpinoy.org/3d-studio-max-tutorials-f46/-t1.htm Mon, 09 Aug 2010 12:29:46 GMT 10 http://i828.photobucket.com/albums/zz208/cgpinoy/cgbanner5_1080x80.jpg http://www.cgpinoy.org/3d-studio-max-tutorials-f46/-t1.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/background-manipulation-made-easy-t2909.htm bokkins Hi guys. Have you ever had problems with your backgrounds? Horizon lines? image is too long? Yung tipong ok sana ang background kaso hindi swak sa rendering. I have prepared a very simple tutorial to solve this problem. Here it is. Enjoy! Rendered image on black background Adding a background image Image on viewport background Rendered image with a normal sky background Cropping and placement Brightness and contrast Final Output 3d Studio Max Tutorials Tue, 17 Mar 2009 02:01:12 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/background-manipulation-made-easy-t2909.htm#56079 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/background-manipulation-made-easy-t2909.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/importing-autocad-models-to-3d-max-t3984.htm render master This topic was always asked eversince, so i bring it now here, my workflow on importing Autocad Models to 3d Max. I would like to share my workflow the proper way of linking Autocad Models to 3d Max. The procedures, the pros and cons and some important issues concerning the method. Procedure 1 1. In Autocad I must first establish the units in meters as well as in 3d max. Although in Autocad you can model in any unit and rescaled it during the file linking process. But ... 3d Studio Max Tutorials Thu, 14 May 2009 07:52:11 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/importing-autocad-models-to-3d-max-t3984.htm#79366 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/importing-autocad-models-to-3d-max-t3984.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3dsmax-tutorials-introduction-to-vray-t1463.htm edosayla Mga Kapatid na bago pa lng sa field ng VRAY ito pong kunting tutorials para sa mga gustong gumamit ng VRAY d po ito para sa mga advanced ha sana po maka tulong sa inyo thanks po more power sa lahat 2shared.com /file/4467744/30ef83a3/Introducing_Vray_by_Edosayla.html 3d Studio Max Tutorials Tue, 16 Dec 2008 07:12:52 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3dsmax-tutorials-introduction-to-vray-t1463.htm#26330 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3dsmax-tutorials-introduction-to-vray-t1463.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/material-tutorials-and-general-tips-t13502.htm kurdaps! Step By Step Tutorials and General Tips by Philip Klevestav 1. MATERIAL TUTORIALS Step by step tutorials for various materials 2. WORKING WITH MODULAR SETS How to build modular meshes and general workflow 3. WORKING WITH MODULAR ROCKS Tutorial about creating rock/organic modular meshes Tutorials >>HERE 3d Studio Max Tutorials Mon, 09 Aug 2010 12:29:46 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/material-tutorials-and-general-tips-t13502.htm#258942 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/material-tutorials-and-general-tips-t13502.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/setting-up-3d-modeling-references-part-2-t11578.htm kunito ... hello... ... sorry for the long gap... hehehe... ... but i hope it'll be worth the wait... ... ok... so this is the follow up to my lesson in PHOTOSHOP... ... Setting up 3d Modeling References in PHOTOSHOP... ... just to recap or to those who'd like to learn the PREQUEL i suggest you check out that link... ... now to start... first of... lets divide this topic into 2 SUB LESSONS to learn or discover... ... 1st CREATING MATERIAL and ASSIGN / APPLYING MATERIALS ... ... 3d Studio Max Tutorials Fri, 14 May 2010 08:46:20 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/setting-up-3d-modeling-references-part-2-t11578.htm#228812 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/setting-up-3d-modeling-references-part-2-t11578.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/how-to-create-a-nice-pillow-t13488.htm ERICK Hi guys, i'd like to share my workflow on how to create a nice pillow in 3ds max. I've used 3ds Max Design 2011 for this tutorial, but you can use your own version as long as we have the same modifiers and tools as we go along. I would like to be as detailed as I want to, for the benefit of those who are new to Max Modeling. So I will not let you hanging, let's move on!!! 1. Fire up your Max program, go to perspective view and drag a box. See the highlighted portion of the image below for ... 3d Studio Max Tutorials Mon, 09 Aug 2010 04:25:22 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/how-to-create-a-nice-pillow-t13488.htm#258761 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/how-to-create-a-nice-pillow-t13488.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/the-ultimate-solution-for-bloated-3ds-file-t12563.htm wireframan Don't know if someone already shared this or someone encountered this "3ds virus" anyway here's the link to the solution. have fun and say goodbye to your heavy bloated 3ds file. http://area.autodesk.com/forum/autodesk-3ds-max/autodesk-3ds-max--3ds-max-design-2010/unexplained-increase-in-file-size/page-2/ 3d Studio Max Tutorials Fri, 25 Jun 2010 13:17:25 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/the-ultimate-solution-for-bloated-3ds-file-t12563.htm#244569 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/the-ultimate-solution-for-bloated-3ds-file-t12563.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/creating-simple-curtain-2-t2946.htm render master I would like to share my workflow here on how to make a curtain through simulation process 1. First is the creation of the nurb curve, enough for the width of one window. Or you can use spline if you want to. Extrude it up, and apply FFD Modifier for compressing and adjustment on the rod. Then i create a rod out of sphere, and make some ring holder from torus. Then convert it to poly ] 2. The second one was a bit complicated hehehehhee. Set my curtain on the rod, ... 3d Studio Max Tutorials Wed, 18 Mar 2009 13:00:41 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/creating-simple-curtain-2-t2946.htm#56658 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/creating-simple-curtain-2-t2946.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/pinoycad-3dsmax-basic-quiz-t5609.htm edosayla Hi mga kapatid at mga masters .. share ko lng po ang quiz namin sa school dito sa dubai ... hope maka help din po ito sa mga gustong mag learn ng basics sa 3dsmax .. upload ko ang exam namin .. pasensya na po ha mga bagohan lng kasi mga student ko kaya expect na simple lng ang mga exams at quiz namin. LEVEL : Beginers ito po yung link play using windows media player .. 2shared.com /file/6970549/c66c388e/Quiz_Basic.html Salamat po at more power sa lahat na ... 3d Studio Max Tutorials Mon, 03 Aug 2009 05:28:10 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/pinoycad-3dsmax-basic-quiz-t5609.htm#115973 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/pinoycad-3dsmax-basic-quiz-t5609.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/modeling-a-simple-basin-t13041.htm go_jerome The purpose of this tutorial is to remind us that there are easy ways to model simple objects. I'm not really a fan of having to use boolean in modeling. I hope that this helps. Ok let's start off by going to the front view and use line to shape your object. What i did here is to only do half of the basin. Next is going to the hierarchy panel and click on the "affect pivot only". This way we can move our gizmo on the center. Just make sure to turn the "affect pivot ... 3d Studio Max Tutorials Sat, 17 Jul 2010 02:39:29 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/modeling-a-simple-basin-t13041.htm#251685 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/modeling-a-simple-basin-t13041.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/creating-random-grass-t6975.htm bokkins Hi guys, as promised, ito na ang random grass tutorial ko from my recent post na Balinese Duplexes. Ok let's start. Here are the materials I used. This is the very same resolution I used. Grass Material Sand Material And here's the process. First, I used two(2) Planes for this technique. top plane is the grass material with opacity(cellular) and the bottom plane is my sand material, make sure there's only a little gap between the two as not to create so much shadow. you may use ... 3d Studio Max Tutorials Fri, 02 Oct 2009 02:32:07 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/creating-random-grass-t6975.htm#144307 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/creating-random-grass-t6975.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/cgpinoy-tutorials-ivy-gen-plugins-t5961.htm edosayla Hello mga kapatid .. pasensya na po sa tutorial na ito medyo mababa lng voice ko nasa office kasi.. anyway share ko lng ginawa kung tutorial about sa IVY Gen na plugin. nag upload na rin ako ng video sa VIMEO pero matagal pa ng kunti bago ma view kasi nga nag convert pa sya .. anyway ito yung tutorial hope nag enjoy kayo at marami kayong magagawang project using this plugin. CGPinoy IVY Gen Tutorial from Eric Dosayla on Vimeo. ito naman po ang link sa tutorial 2shared.com ... 3d Studio Max Tutorials Tue, 18 Aug 2009 06:20:48 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/cgpinoy-tutorials-ivy-gen-plugins-t5961.htm#123030 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/cgpinoy-tutorials-ivy-gen-plugins-t5961.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3d-max-modelling-tips-t3696.htm render master I will be starting this modelling thread... lagay ko mga modelling tips. And kung may mga request kayo, post nyo lang here. so stay tune lang here 3d Studio Max Tutorials Wed, 29 Apr 2009 09:56:17 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3d-max-modelling-tips-t3696.htm#73309 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3d-max-modelling-tips-t3696.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/basic-ies-lighting-guidelines-t2168.htm render master Basic IES Lighting Guidelines sample images guidelines download sample files here: basicieslightings.zip download my ies files from this link: http://www.3dallusions.com/forums/architectural-cg-resources /2017-ies-viewer-files.html http://www.evermotion.org/vbulletin/showthread.php?t=60020 3d Studio Max Tutorials Thu, 29 Jan 2009 06:12:32 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/basic-ies-lighting-guidelines-t2168.htm#39761 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/basic-ies-lighting-guidelines-t2168.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/simple-house-modelling-by-f41-t6208.htm f-41 second share ko ng tips mga pips....para sa mga baguhan pong mag model I hope makatulong po sa inyo...first thing, mahirap pala gumawa ng modelling tutorial, pero try ko para sa inyo. and para kay sir erick,, request nya ito e. matagal na nya ako kinukulit. isang diskarte palang ito sa max. pero syempre basic tyo lagi magsisimula, and pag nakuha nyo ito makukuha nyo na rin yung whole idea ng modelling sa max. eventually, kayo mismo makaka figure kung paano gagawin..... check nyo rin ... 3d Studio Max Tutorials Fri, 28 Aug 2009 16:22:04 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/simple-house-modelling-by-f41-t6208.htm#128201 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/simple-house-modelling-by-f41-t6208.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/game-art-tutorials-t7314.htm boyluya Thought I'd share the tutorials about creating game assets I found on the internet. Maybe these could help increase the interest of many Pinoys in making 3d for games. Enjoy. 3dTotal's Game Character Development (downloadable videos) http://www.3dtotal.com/team/Tutorials_3/Mudbox_Modelling/mudbox01.php Gun tutorial (downloadable videos) http://racer445.com/pages/tutorials/ak-tutorial.php Marcus Dublin's Game Creature Creation (html) http://www.marcusdublin.com/ParagalisTutorialPage1.html Digital ... 3d Studio Max Tutorials Thu, 22 Oct 2009 09:05:03 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/game-art-tutorials-t7314.htm#150852 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/game-art-tutorials-t7314.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3ds-max-intro-to-modeling-chair-t6661.htm kunito ... Intro po muna... hehe... ... This lesson is meant for those that are total beginners in 3ds max... ok... lets start... 3d Studio Max Tutorials Mon, 14 Sep 2009 20:09:30 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3ds-max-intro-to-modeling-chair-t6661.htm#137577 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3ds-max-intro-to-modeling-chair-t6661.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3ds-max-intro-to-modeling-using-bend-twist-taper-ffd-box-t6794.htm kunito ... ok... ... kung ginawa nyo yung chair exercise ... or gumawa kayo ng iba pang objects out of the ...standard and extended primitives lesson... ... sa lesson na ito... ... Gagamit naman tayo ngayon ng MODIFIERS... ... kung itutulad natin sa ibang software na nagamit nyo na... ... sa WORD ang inilalagay sa text para magka-design "WORD ART"... ... sa PHOTOSHOP ang inilalagay sa layers ay "LAYER FX"... dito naman sa 3ds Max... ... Modifiers... ... 3d Studio Max Tutorials Mon, 21 Sep 2009 11:35:10 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3ds-max-intro-to-modeling-using-bend-twist-taper-ffd-box-t6794.htm#140550 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3ds-max-intro-to-modeling-using-bend-twist-taper-ffd-box-t6794.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3d-max-lighting-and-rendering-tips-t3870.htm render master I will be starting this Lighting and Rendering Tips... i will be putting here lighting and rendering tips, techniques, and tweaking . And if you have some request , just post it in here. 3d Studio Max Tutorials Thu, 07 May 2009 07:35:40 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3d-max-lighting-and-rendering-tips-t3870.htm#76649 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3d-max-lighting-and-rendering-tips-t3870.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/texturing-rendering-lighting-exterior-t12827.htm NUHJSANTI
http://cg.tutsplus.com/tutorials/autodesk-3ds-max/an-introduction-to-texturing-lighting-and-rendering-architectural-exteriors-day-3/]]> 3d Studio Max Tutorials Wed, 07 Jul 2010 03:00:15 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/texturing-rendering-lighting-exterior-t12827.htm#248618 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/texturing-rendering-lighting-exterior-t12827.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/pelt-mapping-good-for-trunks-of-trees-t12722.htm maq1226
http://www.3dlessons.com/tutorials/How-to-use-Pelt-Mapping-15858.html]]> 3d Studio Max Tutorials Fri, 02 Jul 2010 05:10:16 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/pelt-mapping-good-for-trunks-of-trees-t12722.htm#246903 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/pelt-mapping-good-for-trunks-of-trees-t12722.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/tile-roof-modeling-in-max-t12105.htm vincentsky20 good day mga masters, could anyone give me a screenshot tutorial on how to make a ridge roll/ridge cap. hindi ko po kasi kabisado dito sa max. . sana matulungan niyo po ako ulit. thanks mga sir and GODSPEED. 3d Studio Max Tutorials Sun, 06 Jun 2010 02:02:39 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/tile-roof-modeling-in-max-t12105.htm#237510 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/tile-roof-modeling-in-max-t12105.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/spline-parametric-modelling-tower-t5376.htm onzki Hi cgpinoy , I just want to share this tutorial na nakita ko (and a lot more from this website).. alam na siguro ito ng karamihan pero sa mga starters like me - you can add sa modelling reference nyo. I like this approach parang character modelling.. unlike the conventional box & editpoly method. A good reference especially for modelling buildings with irregular forms and using modifiers / stack etc... http://www.wonderhowto.com/how-to/video/how-to-build-a-spline-tower-in-3ds-max-255282/view/ and ... 3d Studio Max Tutorials Wed, 22 Jul 2009 07:50:39 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/spline-parametric-modelling-tower-t5376.htm#111158 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/spline-parametric-modelling-tower-t5376.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/tree-storm-tutorials-t6737.htm render master TREE STORM, the plugin for 3ds Max®, is a breakthrough product, the first 4D modeler for trees ever developed. The plugin allows you to model trees in real-time directly into the Max scene without using DXF and 3DS files, and, thanks to its fourth dimension - the dimension of time, you can animate trees on the wind. Image courtesy of Maria Jahn, artist, Germany I will not tackle here how to install Tree Storm. I will just go directly on how to manipulate Tree Storm. 1. Assuming ... 3d Studio Max Tutorials Thu, 17 Sep 2009 20:23:19 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/tree-storm-tutorials-t6737.htm#139277 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/tree-storm-tutorials-t6737.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/creating-puddle-on-the-road-t5597.htm 3DZONE Due to CGPians request about the "Puddle" on the road, dito ko na lang sa 3DMax/Vray tutorial nilagay para na rin sa nakakarami. Share ko yung setup ko sa inyo. First go >> HERE HERE 3d Studio Max Tutorials Sun, 02 Aug 2009 12:20:07 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/creating-puddle-on-the-road-t5597.htm#115676 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/creating-puddle-on-the-road-t5597.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/rendering-tutorials-t12213.htm mcgoogles Good Day CGpipz.. I personally made this site. Merong downloads section at tutorials section. All about 3dmax and Vray. Hope nakatulong.. http://www.free-3d-models.***.t*/ Edited link due to copyright of models unfortunatelly, may pop-up ad. i need those to keep the site running.. salamat po CGpinoy. for now isang tutorial pa lang nagawa ko. more soon.. O.T. to mods: tamang section ba ang pagpost ko? 3d Studio Max Tutorials Fri, 11 Jun 2010 17:17:30 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/rendering-tutorials-t12213.htm#239568 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/rendering-tutorials-t12213.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/rendering-by-region-t11079.htm f-41 4th tutorial - ito naman po para maka iwas crash ng PC ulit di ako sure kung ito ba yung tinatawag nilang "render compositing". based na rin sa dati ko nang na post na tutorial - http://www.cgpinoy.org/3d-studio-max-tutorials-f46/rendering-tips-t6118.htm di gaano na pansin, anyway gawa nalang uli ako ng bago. meydo ginaganahan mag share e ngayon kaya ito po para sa mga newbie at nahihirapan mag render at nagcra-crash ang PC. STEP 1 1. area to render > pick region 2. render out: ... 3d Studio Max Tutorials Fri, 23 Apr 2010 13:00:45 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/rendering-by-region-t11079.htm#219835 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/rendering-by-region-t11079.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/grouping-modifying-a-group-and-file-merging-t6916.htm kunito ... kung kayo ay nakakapag model na... ... lalo na kung "Assembly Type" (yung binubuo ng hiwa-hiwalay na objects...) ... example natin...Chair Exercise... ... siguro... na-encounter nyo na ang ilan sa mga questions na to... - paano ko madaling ma-select ang Model ko? - paano ko magagamit sa ibang Max File or Scene ang na-Model ko? ... eto ang ilan sa mga karaniwang answers... (isinali ko din ito as last steps sa Chair Exercise natin) Grouping... Modifying ... 3d Studio Max Tutorials Mon, 28 Sep 2009 16:47:21 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/grouping-modifying-a-group-and-file-merging-t6916.htm#143031 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/grouping-modifying-a-group-and-file-merging-t6916.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/maximizing-aec-foliage-capabilities-t9923.htm render master For newbies and alike: 3d Max has a lot to offer in terms of creating entourage. Even wtihout those expensive plugins and trees model, you can create one for your own - its just inside your 3d max. With just some little effort you can have those natures beaty on your renderings. When i was new in 3d max, i was disapointed too with the AEC foliage. When i put it on the scene, i have those bright colored trees and branches. But now i just realized, they are just giving us some efforts to ... 3d Studio Max Tutorials Wed, 10 Mar 2010 06:04:35 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/maximizing-aec-foliage-capabilities-t9923.htm#198598 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/maximizing-aec-foliage-capabilities-t9923.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/compilation-of-tutorials-by-3dxmodel-t11056.htm bokkins
http://www.3dxmodels.com/index.php?option=com_content&view=category&layout=blog&id=9&Itemid=10]]> 3d Studio Max Tutorials Thu, 22 Apr 2010 11:50:47 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/compilation-of-tutorials-by-3dxmodel-t11056.htm#219381 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/compilation-of-tutorials-by-3dxmodel-t11056.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/mapping-of-trees-with-diffuse-and-opacity-in-plane-t2464.htm OwpieH Patulong po ulit ng tutorials kung paano mag map sa isang plane ng trees na 2d.meron na po ako opacity at diffuse map ng trees hinde ko lang po alam paano ilagay.help po please.tnx 3d Studio Max Tutorials Tue, 17 Feb 2009 09:00:54 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/mapping-of-trees-with-diffuse-and-opacity-in-plane-t2464.htm#45984 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/mapping-of-trees-with-diffuse-and-opacity-in-plane-t2464.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/easy-image-rectification-using-3dmax-vray-render-id-photoshop-cs-t8127.htm 3DZONE Snapshot 1 - Choose files from your 3DMax Work & follow instructions below Snapshot 2 - Save files for each images as PNG or JPG Snapshot 3 - Using Photoshop CS, combine two images in one files and edit... 3d Studio Max Tutorials Mon, 07 Dec 2009 11:16:13 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/easy-image-rectification-using-3dmax-vray-render-id-photoshop-cs-t8127.htm#166121 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/easy-image-rectification-using-3dmax-vray-render-id-photoshop-cs-t8127.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/default-scanline-renderer-in-5-easy-steps-for-small-interior-spaces-t916.htm bokkins Hi guys. Finally, natapos ko din itong default scanline tutorial ko. mga references ko nito ay sina smoke3d at enigma, thank you mga idol ko. hehe. I tried to simply this tutorial para mas mabilis maintindihan at maalala. Marami pang ibang ways to do scanline, and this tutorial is one way. sana magustuhan nyo. ok, lets start! This tutorial will focus on how to use the 3d studio max default scanline renderer for small interior spaces. for this tutorial, we will be needing a textured ... 3d Studio Max Tutorials Mon, 17 Nov 2008 04:33:27 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/default-scanline-renderer-in-5-easy-steps-for-small-interior-spaces-t916.htm#15816 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/default-scanline-renderer-in-5-easy-steps-for-small-interior-spaces-t916.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/texturing-tutorial-t11185.htm qcksilver hi,i just wanna share this tutorial i encounter while surfing the net,hope you like it. here's the link http://www.google.com/imgres?imgurl=http://www.3dtotal.com/team/Tutorials/javi_tut/TUTOPARED.jpg&imgrefurl=http://www.3dtotal.com/team/Tutorials/javi_tut/javi_tutorial.php&usg=___ryamYrBbk3yW0jlEvuwOLr8Dns=&h=582&w=632&sz=70&hl=en&start=3&sig2=by81qM83rKPi8-sm9giC2g&itbs=1&tbnid=wZmzvGvtSZxRVM:&tbnh=126&tbnw=137&prev=/images%3Fq%3Ddirty%2Bwalls%2Bmaterial%26hl%3Den%26gbv%3D2%26tbs%3Disch:1&ei=tjHVS8zrNdSMOKitnOUN i ... 3d Studio Max Tutorials Tue, 27 Apr 2010 14:53:33 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/texturing-tutorial-t11185.htm#221706 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/texturing-tutorial-t11185.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/scatter-compound-object-t1800.htm bokkins
Max Help Menu


Scatter Compound output.
]]> 3d Studio Max Tutorials Fri, 09 Jan 2009 02:34:21 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/scatter-compound-object-t1800.htm#32193 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/scatter-compound-object-t1800.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/this-is-great-tutorial-website-for-max-user-try-this-one-t5373.htm dotesign http://www.architectural-rendering-guide.com/]]> 3d Studio Max Tutorials Wed, 22 Jul 2009 06:54:03 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/this-is-great-tutorial-website-for-max-user-try-this-one-t5373.htm#111118 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/this-is-great-tutorial-website-for-max-user-try-this-one-t5373.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/grass-tutorial-by-chobs-t7922.htm chobs Grass Tutorial by Chobs Introduction: This tutorial is inspired by Peter Uthrie and James Shaw. Here are the links of their tutorial: http://www.peterguthrie.net/blog/2009/03/vray-grass-tutorial-part-1/ http://www.peterguthrie.net/blog/2009/04/vray-grass-tutorial-part-2/ http://www.jamesshaw.co.nz/blog/?p=400 My version here is for the benefit of our fellow CGPinoys. The Difference between my tutorial and theirs have slightly to do with the Material and the Technique ... 3d Studio Max Tutorials Tue, 24 Nov 2009 05:26:03 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/grass-tutorial-by-chobs-t7922.htm#162654 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/grass-tutorial-by-chobs-t7922.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/tips-on-choosing-the-right-color-by-mokong-t3702.htm mokong Ang iba sa in inyo alan na cguro ito.. pero share ko lng po... baka makatulong sa in u mhga ka CGpipz... 1.) follow this link for the "List of Colors" provided by wikipedia... http://en.wikipedia.org/wiki/List_of_colors 2.) ito po yung sreenshot niya.. may RGB numbers po dyan kopyahin niyo... for example: Biege color with R=245, G=245, B=220 3.) ilagay niyo lng po ito sa color selector niyo... example sa diffuse color as seen on below... hope you enjoy ... 3d Studio Max Tutorials Wed, 29 Apr 2009 12:13:28 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/tips-on-choosing-the-right-color-by-mokong-t3702.htm#73388 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/tips-on-choosing-the-right-color-by-mokong-t3702.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/help-on-using-cloth-modifier-t5663.htm sentido

pa help naman on how can i prevent overlapping of "cloth" when using cloth modifier.. thanks

]]> 3d Studio Max Tutorials Wed, 05 Aug 2009 10:30:23 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/help-on-using-cloth-modifier-t5663.htm#117029 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/help-on-using-cloth-modifier-t5663.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3ds-max-2009-tutorials-hair-cloth-t10388.htm Muggz

http://www.scribd.com/doc/18007820/3ds-Max-2009-Tutorials-Hair-Cloth?secret_password=&autodown=pdf]]> 3d Studio Max Tutorials Sun, 28 Mar 2010 17:17:47 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3ds-max-2009-tutorials-hair-cloth-t10388.htm#207942 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3ds-max-2009-tutorials-hair-cloth-t10388.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/interior-and-exterior-complete-t52.htm bokkins Hi guys, share ko lang tong mga tutorials from the net. mga complete tutorials that could guide us sa pag setup ng scene, mula modeling through rendering. Interior by Michal Rogozinski http://www.evermotion.org/tutorials/mich/ Exterior by Huseyin Karaaslan http://www.3dtotal.com/team/Tutorials/yellow_house/yellow_01.asp added: http://www.evermotion.org/tutorials/show/7900/making-interior-scene 3d Studio Max Tutorials Tue, 23 Sep 2008 16:03:06 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/interior-and-exterior-complete-t52.htm#460 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/interior-and-exterior-complete-t52.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3dsmax-tutorials-using-multi-sub-materials-t1431.htm edosayla

2shared.com /file/4455609/c659e276/MultiSubMaterial.html]]> 3d Studio Max Tutorials Sun, 14 Dec 2008 12:01:01 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3dsmax-tutorials-using-multi-sub-materials-t1431.htm#25804 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3dsmax-tutorials-using-multi-sub-materials-t1431.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/creating-cornice-with-bevel-profile-modifier-t3358.htm bokkins Hi guys, I've prepared a very simple tutorial on how to create cornices for our interiors and exteriors. The process can also be used in creating picture frames, door and window jambs and other elements that use moldings. This is more powerful than your simple extrude modifier. We will be using the bevel profile modifier. Hope you like it. Before we start. And since we are dealing with profiles, here are some sites that are good references of cornice profiles courtesy of www.google.com: 1. ... 3d Studio Max Tutorials Mon, 13 Apr 2009 17:21:49 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/creating-cornice-with-bevel-profile-modifier-t3358.htm#66605 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/creating-cornice-with-bevel-profile-modifier-t3358.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/rpc-help-t4978.htm jhaamm tannong ko lang kung paano maglagay ng rpc objects sa 3ds max...

tnx tnx...]]> 3d Studio Max Tutorials Wed, 01 Jul 2009 09:53:21 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/rpc-help-t4978.htm#101791 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/rpc-help-t4978.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/15-tiips-and-tricks-in-3dsmax-t9949.htm edosayla Hi po mga kapatid mga master share ko lng po ito if na repost na po kindly delete it. Tip 1.) Did you know that "architectural materials" and "self illuminated" materials are light emitting (for Mental Ray & Vray) ? If you apply them on a box you will get a similar effect as a "photometric area light" or a "Vray light". Tip 2.) Try to use always soft shadows in your renderings if possible. Hard shadows are looking always very fake. In "Mr ... 3d Studio Max Tutorials Thu, 11 Mar 2010 06:06:55 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/15-tiips-and-tricks-in-3dsmax-t9949.htm#198955 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/15-tiips-and-tricks-in-3dsmax-t9949.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/how-to-map-aec-objects-t9920.htm OwpieH mga master paano ba imap ang aec object like door and windows?kasi para syang nakargroup pero un group nman nd ko sya maisa isa ba imap like glass and frame help naman po. 3d Studio Max Tutorials Wed, 10 Mar 2010 05:18:42 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/how-to-map-aec-objects-t9920.htm#198574 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/how-to-map-aec-objects-t9920.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3d-max-material-composition-tips-t3872.htm render master I will putting here all the materials composition tips. Materials that are so rare and hard to achieve. If you have a reqeust, just post it here. 3d Studio Max Tutorials Thu, 07 May 2009 07:47:59 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3d-max-material-composition-tips-t3872.htm#76658 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3d-max-material-composition-tips-t3872.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/crash-max-need-help-3dmax-2009-t9491.htm arkimon84 need help po kng pano maiwasan ang crash sa max...tnx po... 3d Studio Max Tutorials Thu, 18 Feb 2010 08:25:55 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/crash-max-need-help-3dmax-2009-t9491.htm#189997 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/crash-max-need-help-3dmax-2009-t9491.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/multi-sub-object-modeling-edit-poly-t9154.htm kunito ... hello... ... this is a crash intro to Multi Sub Object Modeling via EDIT POLY... ... "Spare" muna natin ang details for Later... ... what is important is... ... magkaroon kayo ng "Workable Familiarization" sa EDIT POLY Modifier and its ROLLOUTS & R. CLICKS options... ... ok... Gambaru!!! Hajime!!! (i included steps to use units para dun sa mga sanay sa units... pero di ako mag bibigay ng specific measurements or values...remember... spare the details...) 1. ... 3d Studio Max Tutorials Mon, 01 Feb 2010 22:09:33 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/multi-sub-object-modeling-edit-poly-t9154.htm#183563 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/multi-sub-object-modeling-edit-poly-t9154.htm http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3dsmax-tutorials-from-http-wwwlouismarcouxcom-maxtipshtm-t5598.htm onzki
http://www.louismarcoux.com/MaxTips.htm

]]> 3d Studio Max Tutorials Sun, 02 Aug 2009 13:34:25 GMT http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3dsmax-tutorials-from-http-wwwlouismarcouxcom-maxtipshtm-t5598.htm#115698 http://www.cgpinoy.org/3d-studio-max-tutorials-f46/3dsmax-tutorials-from-http-wwwlouismarcouxcom-maxtipshtm-t5598.htm