Mga AutoCAD master, patulong about text and dimensions annotation

Paano po ba ang tamang paraan ng pag-annotate ng text and dimensions (procedures po sana kung pwede). Ang problema kasi kung ano ang nilagay kong height ng text (halimbawa yung word na "DINING AREA'"), ay pareho din ang lumalabas na height ng dimension text (halimbawa yung dimension length na "5.00 m"). Sa Text Style dialog box naglagay ako ng "3" for height (in mm), then pagdating naman sa Dimension Style Manager dialog box, under text height, hindi ako maka input ng number kasi naka fix na rin sa "3" ang text height for dimensions. Gusto ko sana pagdating sa paperspace/layout tab, ay 3 mm ang height ng text at 1.8 mm ang height dimension text.

Nag search na rin po ako dito kung may related na topic na rin na nag post, so far yung http://www.cgpinoy.org/t6555-autocad-exclusive-updates#280175 ang nakita ko pero medyo hindi nasagot yung problema ko.

Another question lang po, In my own way of annotating, bakit may lumalabas na parang "multiple word shadow" after kong i-click yung word na KITCHEN

1. normally when we create a text style we dont put any amount on the text height, we just remain as it is = 0.0. so when we use this text style on my dimention style, we cant overide its height.

if you put a text height on your text style, you cant overide it on the dimension text style height, it will become fixed. see illustration.

case 1



case 2




2. the text you are using has an annotative properties thats why it has a text shadow like. to get rid on it, go to your text style ( the one you use) then untick annotative.

well explained naman sir ah...follow this thread...http://www.cgpinoy.org/t6555p15-autocad-exclusive-updates

about sa text when you click it there is multiple shadows, IMHO baka sa mouse properties mo ang nakalagay is scale hindi mtext edit..so everytime n icclick mo text magreresize siya...try to check it..customize and look for mouse properties...if it is so drag mtext edit to replace the scale...hope it helps...

Pag dinelete ko yung mga inadd kong scales, naggiging normal na ulit yung word na "DINING". Pero, what could possibly the advantage of having these several scales? What is the purpose of these scales?

Thanks po sa mga replies..

@ render master kailangan ko pa ring i-annotate yung text style para fixed ang height niya if ever mag change ako ng scale sa paperspace..

@ronzcobella thanks po sa reply

- the advantage of annotative text is, you will find it easier to switch from different viewport scale when printing without having to assign new text height, just switch on its annotative scale.

anyway text shadow as you mentioned before is not printable, so you dont have to worry about it. its just to show that the text is annotative

to get rid on it, try the following

command: ANNOALLVISIBLE
Enter new value for ANNOALLVISIBLE <1>:
1 means all annotation on text is visible
0 means only the current annotation scale will show