Autocad Problem

Sir ask ko lang kung bakit hindi mag ka level ang mga linya kung sa UCS front view na ako,,kaya pala hindi ko ma hatch ,,any help po mga sir,,,
[img][/img]
[img][/img]
[img][/img]

http://www.cgpinoy.org/t22114-help-elevation-of-objects-autocad

ito sir try mo basahin mo lang yan nandyan ang sagot.

krizaliehs07 wrote:http://www.cgpinoy.org/t22114-help-elevation-of-objects-autocad

ito sir try mo basahin mo lang yan nandyan ang sagot.

sir maraming salamat po ,,,full version po nang cad ang gamit ko,,sinubukan ko na rin command flatten di parin nagbago,,,

please elaborate on what you want to achieve with this.. isometric view for the plan or a 3d view ? much better to provide details so you will have exact answers..

i think you should hatch it first before making an isometric view or 3d.. let us wait for other masters in this field..

ejcapili wrote:please elaborate on what you want to achieve with this.. isometric view for the plan or a 3d view ? much better to provide details so you will have exact answers..

i think you should hatch it first before making an isometric view or 3d.. let us wait for other masters in this field..

sir gusto ko lang malaman kung may solusyon ba na i level lahat ang linya pang naka front view na ako kasi kung titingnan sa top view ok namn pang naka isometric na at front o left view hindi na sya magka level,,kaya pala kung mag hatch ko sa top di ko ma hatch kasi nga di magkalevel o nagkarugtong ang mga linya,,,

may express tools ka ba?

baka 3d polyline ang ginamit mo instead of line or polyline. I suggest redo your drawing in a top view of 2d Drafting and Annotation workspace and set your UCS to World.

pwede yata ang OVERKILL command dito... then osnap mo na lang lahat kung saan ung mga end ng lines na dapat nakaconnect gaya ng makikita mo sa plan /top view?

try mo ang change command then select all, select properties, select elevation, specify new elevation to 0

how is your workflow? i mean do you mix 2d plans with 3d modelling at same time? make sure you are working on 2d for layout just like droo had said.
the overkill command will erase duplicate entity but will not make it in one plane.

try this sir, sellect all, right click go to properties, change start z and end z to 0

render master wrote:may express tools ka ba?

o sir may express ako,,sinubukan ko yong sinabi mo na flatten sir ok naman kaso lang nasira ang mga curve profiles gaya ng mga moulding designs edit ko nalang at least pag naka front na siya naka level na lahat,,salmat po ng marami sir,,
[img][/img],

droo wrote:baka 3d polyline ang ginamit mo instead of line or polyline. I suggest redo your drawing in a top view of 2d Drafting and Annotation workspace and set your UCS to World.

Valiant wrote:pwede yata ang OVERKILL command dito... then osnap mo na lang lahat kung saan ung mga end ng lines na dapat nakaconnect gaya ng makikita mo sa plan /top view?

oyie wrote:try mo ang change command then select all, select properties, select elevation, specify new elevation to 0

KreativeKingdom wrote:how is your workflow? i mean do you mix 2d plans with 3d modelling at same time? make sure you are working on 2d for layout just like droo had said.
the overkill command will erase duplicate entity but will not make it in one plane.

maraming salamat po mga sir,,sinubukan ko lahat ito ganun parin ,,flatten ko nalang tapos edit ko nalang ang mga profiles na nasira,,maraming salamat po mga sir,,,

qcksilver wrote:try this sir, sellect all, right click go to properties, change start z and end z to 0

salamat sir,,ito pala ang solusyon sa ganitong problema,,salamat ng marami

manlomz wrote:

qcksilver wrote:try this sir, sellect all, right click go to properties, change start z and end z to 0

salamat sir,,ito pala ang solusyon sa ganitong problema,,salamat ng marami

astig!!! paturo ako bukas nyan ha