CARPET Tutorial (Vray for Sketchup)

First topic message reminder :

good day cg peeps.. share ko naman sa inyo kung pano gumawa ng carpet...

1.insert a pillow from this link click me



2. stretch those four edges for a carpet look



3. and then stretch down the height approximately 10mm high



4. apply your favorite carpet diffuse material (texture position as your preference scale)



carpet diffuse map


5. open the material editor, look for the linked carpet material and check bump and displacement



6. bump settings (multiplier = 0.6)

displacement settings (multiplier = 1.5)

bump/displacement map


7. open the render options change the settings as per image shown (these settings where the real carpet will occur, the value 2 for the edge length (pix) should be the thickness of your carpet strands, the value 0.8 for the amount will be the length of carpet strands)



8. i made a room for this tutorial



9. and apply floor and wall material (interior lighting were set-up already at this point)



10. inserted some components



11. finished product

ah need ko p b mag apply ng materials sa diffuse????...or only displacement lng aapplyan..????ask lng po..thnx

galing nito.... ...sir erick salamat sa tutorial..nasundan ko..

wow..galing ni2ng tuts mo sir.. di lang xa pang carpet, pwede rin xa sa grass, change lng ng kaunti ang mga settings sa bumps and displcemnt at ska multiplier.... ty sa tuts po sir.

gandang araw po sa inyo mga master,bakit po ba ayaw maging carpet ang ginagawa ko kahit ginaya ko na lahat ng sinabi dito sa tutorial?ano po kaya ang problema?sana po matulungan nyo po ako,bago lang po ako dito,first join mo lang po sa forum pero tanong na kaagad ang na i post..sana po ma tulungan nyo po

Hi! I'm new here.. and I'm also into SKETCHUP.. question Sir Erick... do i really need to put a pillow para pag render ko is magmukha talaga sya real carpet? and...everytime mag-import ako ng ibang texture material, (instead of putting your material inside sketchup) it doesn't look like a real carpet once rendered. Please help.. Thanks!

4. apply your favorite carpet diffuse material (texture position as your preference scale)

ano po ba ibig sabihin ng "diffuse material" ? iba pa po ba ito sa default materials sa sketch up?

(newbie here, sorry)

Hello po... anong version po ang gamit nyo?

gustong gusto ko matuto nito...

thank you po sa tutorial....may bago po matutunan...=)galing!!!

to all masters especially to sir erick
here is my rendition of the carpet from this tutorial.
workflow: SU + vray



tried to enhanced in PS CS2


...naging grayish mga sir yung naging outcome ng carpet ko...ano kaya naging problema sa settings ko? pls. help naman po.

sa mga newbies na tulad ko lalo na dun sa mga di pa makuha yung tutorial na ito, kelangan pong naka-link yung .jpg material na ginamit nyo para mag effect ung bump/displacement...paki-correct na lng po ako mga bossing.

here's another try...pasensya na po kung medyo makulit....


tried with interior lighting



tried to enhance in PS CS2





mukhang lighting ang kulang ko sa first 2 images sa taas...mga master, i need your comments and suggestions please.

Sir, pasensya na po bakit po pag binuksan ko yung material editor ko lang lumalabas ni isang material kundi yun lang default_vray_material kahit nag apply na po ako ng material s object using this steps nyo po. thanks po.

the carpet

hi! ask ko lng how to manipulate or adjust the material editor (bump or displacement) and/or render option to achieve realistic carpet..i am using sketchup8 vray and lahat ng mkita ko na tutorial ang appearance nila don't look the same with the one i am currently using.. for instance, where can i find or is there other term for "multiplier" since in the tutorials na nakikita ko big factor ang multiplier sa effects you want to achieve?

need ur guide po..i am just starting on my tutorial with sketchup vray..thank you very much

the carpet

hi! ask ko lng how to manipulate or adjust the material editor (bump or displacement) and/or render option to achieve realistic carpet..i am using sketchup8 vray and lahat ng mkita ko na tutorial ang appearance nila don't look the same with the one i am currently using.. for instance, where can i find or is there other term for "multiplier" since in the tutorials na nakikita ko big factor ang multiplier sa effects you want to achieve?

need ur guide po..i am just starting on my tutorial with sketchup vray..thank you very much

sevenrich wrote:the carpet

hi! ask ko lng how to manipulate or adjust the material editor (bump or displacement) and/or render option to achieve realistic carpet..i am using sketchup8 vray and lahat ng mkita ko na tutorial ang appearance nila don't look the same with the one i am currently using.. for instance, where can i find or is there other term for "multiplier" since in the tutorials na nakikita ko big factor ang multiplier sa effects you want to achieve?

need ur guide po..i am just starting on my tutorial with sketchup vray..thank you very much

ah baka ang vray mo eh 1.48 or latest.. iba na kasi sa bagong vray.. yung multiplier eh yun yung nasa tabi ng material editor ng bump or displacement..

yung multiplier eh yun yung nasa tabi ng material editor ng bump or displacement..

thank you Dexthaddeus

i have learn so much, from this forum.. thank sir for the nice tutorial