Share your Vray Settings Here

Hi guys, you can share your vray settings in this thread. here's my DRAFT Setttings.



1st bounce: irradiance map
2nd bounce: lightcache

Irradiance map
very very low -4,-4 - very fast, low quality
very low -4,-3 - fast and just ok
go higher if you want better quality

Lightcache
50-100 is draft, low quality
500 is good
2000 is very good in terms of quality but longer rendertime

Environment
you can use hdri on both GI environment and reflection

I used REINHARD here.

Save as preset. I named mine as "vray draft". In this way, you don't need to go through the setup all over again. good luck!

some added tips na din with vray....

make a simple small scale scene line torus/teapot with a ground plane.... pra may result agad rendering nio (low and hi-powered pc's pwede). you can also make testings on some areas like

1)- irradiance preset custom to a low settings and make sure show calc phase is click on, make a quick preview render.... notice the render view port (mabilis) db...?? gagawin mo lang ito just for previewing test settings and to speed things up, later mo na lang iset ang preset to med or high for final rendering output....

2)- in vray image sampler -
on type adaptive sampling - works best than QMC but try the difference with your satisfaction
on Aliasing filter - for better quality we can set it to mitchell-netravali

3)- and in cases for better GI skylight vrayHDRi, pwede ka ring gumawa ng idependent material just drag-and-drop the
vrayHDRi from GI skylight to a vacant slot on your material editor and tweak on settings...

4- and lastly save your preset...under preset pull down menu.... para madali mo na set next time you need vray again...


hope it helps too...

sir bokkins thx po sa pg share ng settings a.. bago p lng po kc ako e.. ppraktis po mg 3ds max salamat po ulit !!

here's more info on vray...

http://www.spot3d.com/vray/help/150SP1/index.htm

sir DK salamat po sa pgbibigay ng guides sa vray!! khit papano nkasunod n ako sa tamang scene.. hehe salamat sa inyo ng marami!!

guys.... Updated vray manual part 2 in pdf format is already available. Its derived from aversis vray manual i compiled into one consisitng of samples and some vray tutorials.

Sir post more trick tips and techniques.. kahit SU o kaya max.. natuto po ako sa pinost nyo.. gusto ko pang matuto pa ng marami.. thanks in advance!! it could help me a lot

dickie_ilagan wrote:some added tips na din with vray....

make a simple small scale scene line torus/teapot with a ground plane.... pra may result agad rendering nio (low and hi-powered pc's pwede). you can also make testings on some areas like

1)- irradiance preset custom to a low settings and make sure show calc phase is click on, make a quick preview render.... notice the render view port (mabilis) db...?? gagawin mo lang ito just for previewing test settings and to speed things up, later mo na lang iset ang preset to med or high for final rendering output....

2)- in vray image sampler -
on type adaptive sampling - works best than QMC but try the difference with your satisfaction
on Aliasing filter - for better quality we can set it to mitchell-netravali

3)- and in cases for better GI skylight vrayHDRi, pwede ka ring gumawa ng idependent material just drag-and-drop the
vrayHDRi from GI skylight to a vacant slot on your material editor and tweak on settings...

4- and lastly save your preset...under preset pull down menu.... para madali mo na set next time you need vray again...


hope it helps too...

SIR ASK KO LANG, draft lang to diba>>???? may settings po ba kayo na pang "HI-RES"??

yes bro draft lang to. taasan mo lang ang irmap and lightcache pwede ng hires to. or gandahan mo lang ung mga materials. un din kasi ang ngpapabagal pro ngpapaganda most of the time.

ask ko lang po, ginamit ko po yung setting na yan tapos tinaas an ko yung light cache to 1000, pero grainy parin sya eh!




eto po yung settings ko,



ano po ba yung mali rine? salamat!

palitan mo din ung irradiance map from custom to medium. tapos ung noise threshold at least 0.005. that's it.

AY SYA! MARAMENG SAL-AMAT, MASTER BOKKINS! SANA AY DI KA MAGSAWA BAGA, LALO NA SOBRANG KULIT KONG BATA!

YOUR THE BEST!

ang kulit mo nga bro. hyper pa. capital letters pa talaga. observe mo naman sana forum ethics minsan. pro ok lang, medyo may freedom naman tayo dito sa forum natin.

tnx s settings tol..the best k tlga

almost the same din kay sir bokks..

- minsan i-check interpolation sa materials dialog box, same sa reflection and refraction under material..match mo lang yung value sa IRR set mo (min and max).. save 15-20%less render time..

- my AA , 8 max subs.. depende sa scene, pero stress test sa system ko. same sa HSph ng IRR ko, usually 30 okie na for small scene, 50 for quality.

- try to check your material, 8subs okie na, 22sub na max ko.


hth, different horse, for different course..